Realtek RTL8812BU drivers on Deepin Linux 20.1

lsmod – to view modules already installed, remove old ones with rmmod
e.g. 88x2bu 2609152 0
r8168 548864 0

lspci – to check Realtek driver capability
e.g. bill@DEEPIN-Bill:~$ lspci | grep Realtek
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

sudo apt-get update
sudo apt-get install build-essential dkms git
git clone https://github.com/cilynx/rtl88x2bu
cd rtl88x2bu/
VER=$(sed -n ‘s/\PACKAGE_VERSION=”(.*)”/\1/p’ dkms.conf)
sudo rsync -rvhP ./ /usr/src/rtl88x2bu-${VER}
sudo dkms add -m rtl88x2bu -v ${VER}
sudo dkms build -m rtl88x2bu -v ${VER}
sudo dkms install -m rtl88x2bu -v ${VER}
sudo modprobe 88x2bu

Deepin Linux 20.1:

sudo iwconfig INTERFACE essid AP_ID key s:PASSWORD


# openSUSE Leap 15.1/Debian 10 (tested)
sudo apt update
sudo apt -y install dkms git bc
git clone https://github.com/fastoe/RTL8812BU.git
cd RTL8812BU
VER=$(sed -n 's/\PACKAGE_VERSION="\(.*\)"/\1/p' dkms.conf)
sudo rsync -rvhP ./ /usr/src/rtl88x2bu-${VER}
sudo dkms add -m rtl88x2bu -v ${VER}
sudo dkms build -m rtl88x2bu -v ${VER}
sudo dkms install -m rtl88x2bu -v ${VER}
sudo modprobe 88x2bu
sudo reboot

NordVPN CLI commands

Welcome to NordVPN Linux client app!

Version 3.7.4

Website: https://nordvpn.com

Usage: nordvpn [global options] command [command options] [arguments…]

Commands:

     account        Shows account information

     cities         Shows a list of cities where servers are available

     connect, c     Connects you to VPN

     countries      Shows a list of countries where servers are available

     disconnect, d  Disconnects you from VPN

     groups         Shows a list of available server groups

     login          Logs you in

     logout         Logs you out

     rate           Rate your last connection quality (1-5)

     register       Registers a new user account

     set, s         Sets a configuration option

     settings       Shows current settings

     status         Shows connection status

     whitelist      Adds or removes an option from a whitelist

     help, h        Shows a list of commands or help for one command

Global options:

   –help, -h     show help

   –version, -v  print the version

For more detailed information, please check manual page.

NordVPN on Linux Install

1. Get the NordVPN repo setup .deb package

You can Download the file here or at the top of this page

2. Install the NordVPN repository

Open the terminal and run the following:sudo apt-get install {/path/to/}nordvpn-release_1.0.0_all.deb

3. Update the apt-get package list

Type this command:sudo apt-get update

4. Install NordVPN

Almost there! Enter the last command to install NordVPN:sudo apt-get install nordvpn

VSFTPD – Starting and Stopping

To start the server, as root type:

/sbin/service vsftpd start

To stop the server, as root type:

/sbin/service vsftpd stop

The restart option is a shorthand way of stopping and then starting vsftpd. This is the most efficient way to make configuration changes take effect after editing the configuration file for vsftpd.

To restart the server, as root type:

/sbin/service vsftpd restart

The condrestart (conditional restart) option only starts vsftpd if it is currently running. This option is useful for scripts, because it does not start the daemon if it is not running.

To conditionally restart the server, as root type:

/sbin/service vsftpd condrestart